PULS

Redundancy unit

DIMENSION series

Y-series

Dual-input redundancy module (2 x inputs + 1 x output)

diode technology
ATEX approval

18Vdc-60Vdc (24Vdc / 48Vdc / 60Vdc nom.)

20A (at 48Vdc)
0.5A/+60°C...+70°C (derating)

24-48Vdc (24Vdc / 48Vdc nom.)

screw-clamp connections

short-circuit protection (25A threshold at 6V)
Series / parallel operation -- 1+1 Redundancy Use of 2 identical power supplies in parallel to provide continued operation following most failures in a single power supply. The 2 power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements. N+1 Redundancy Use of 3 or more identical power supplies in parallel to provide continued operation following most failures in a single power supply. All power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements.

32 mm

DIN rail mounting

W32mm x H124mm x D117mm

-40...+70 °C

150A peak max. inrush (at 18-60Vdc input)

Diode

(18-60Vdc input; 2x5A input) 8.8 W
(18-60Vdc input; 10A input) 9.5 W

Commercialized

YRM2DIODE

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments

Cost effective solution to build redundant systems
Dual input with single output
Alarm Relay-contacts for Each Input Path
2 diodes (common cathode)
DC 24-48V +/-25% (18-60Vdc) Wide-range Input
Full power between -40°C and +60°C
Width only 32mm
Rugged metal housing
Large screw terminals
Easy wiring;
Distribution terminal for negative pole included
3 Year warranty
The YRM2.DIODE is a redundancy module which can be used to build 1+1 and N+1 redundant systems. It is equipped with 2 input channels which can be connected to power supplies with up to 10A output current and 1 output which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behaviour as well as any kind of Hiccup overload behaviour. The YRM2.DIODE has a monitoring circuit included and is the perfect solution when the power supply has no DC-OK function. 2 LEDs and 2 relay contacts signal when 1 of the 2 DC-input voltages is not in range due to a non-functioning or disconnected power supply. In addition to the YRM2.DIODE is the YR2.DIODE which has no monitoring circuitry included. This is the perfect fit when the power supply itself is already equipped with a DC-OK signal (e.g.; DIMENSION Q-Series). Large screw terminals allow an easy installation and a huge international approval package for a variety of applications makes this unit suitable for nearly every situation.

(at 40°C; 20A output; 2x5A/10A input) 25years / 219000 hours
(at 25°C; 10A output; 2x5A/10A input) 25years / 219000 hours

780mVpp (20Hz...20MHz; 50Ω)

9100000h (at 40°C; 2x10A input; MTBF SN 29500 IEC 61709)
10900000h (at 40°C; 2x5A input; MTBF SN 29500 IEC 61709)
15700000h (at 25°C; 2x10A input; MTBF SN 29500 IEC 61709)
18800000h (at 25°C; 2x5A input; MTBF SN 29500 IEC 61709)
9200000h (at 40°C; 2x10A input; MTBF MIL HDBK 217F GB40)
11100000h (at 40°C; 2x5A input; MTBF MIL HDBK 217F GB40)
12600000h (at 25°C; 2x10A input; MTBF MIL HDBK 217F GB25)
15100000h (at 25°C; 2x5A input; MTBF MIL HDBK 217F GB25)
3380000h (at 40°C; 2x10A input; MTBF MIL HDBK 217F GF40)
4060000h (at 40°C; 2x5A input; MTBF MIL HDBK 217F GF40)
4630000h (at 25°C; 2x10A input; MTBF MIL HDBK 217F GF25)
5570000h (at 25°C; 2x5A input; MTBF MIL HDBK 217F GF25)