PULS

Redundancy unit

DIMENSION series

Y-series

Single-input redundancy module (1 x input + 1 x output)

built-in decoupl. MOSFET (for 1+1 or N+1 redundancy)
ATEX approval
for hot-swappable connectors

8.4Vdc-36.4Vdc (12Vdc / 24Vdc nom.)

40A (at 28Vdc)
1A/+60°C...+70°C (derating)

12-28Vdc (12Vdc / 24Vdc nom.)

screw-clamp connections

short-circuit protection (22A threshold at 6V)
Series / parallel operation -- 1+1 Redundancy Use of 2 identical power supplies in parallel to provide continued operation following most failures in a single power supply. The 2 power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements. N+1 Redundancy Use of 3 or more identical power supplies in parallel to provide continued operation following most failures in a single power supply. All power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements.

46 mm

DIN rail mounting

W46mm x H124mm x D127mm

-40...+70 °C

1500A peak max. inrush (at 8.4-36.4Vdc input)

Suitable for all DIMENSION Power Supplies except QT40 Series

(8.4-36.4Vdc input; 20A input) 1.8 W
(8.4-36.4Vdc input; 40A input) 6.2 W

Commercialized

YR40245

(output stage) 320 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments

Single Input with Single Output
Equipped with Plug-connector for Hot Swapping
Suitable for all DIMENSION Power Supplies
Except QT40 Series
Only 150mV Voltage Drop at 40A
Only 6.2W at 40A
160% (65A) peak load capability
Reverse input polarity protection
Full power between -40°C and +60°C
Width only 46mm
Rugged metal housing
Easy wiring;
Distribution terminal for negative pole included
3 Year warranty
The YR40.245 is a redundancy module which can be used to build redundant systems. The module has 1 input and 1 output and can carry nominal currents up to 40A. The output is equipped with a plug-connector which allows replacing the power supply or the redundancy module while the system is running (hot-swapping) The novelty of this redundancy module is the utilization of mosfets instead of diodes for the decoupling of the output. This reduces the heat generation and the voltage drop between input and output. The redundancy module does not require an additional auxiliary voltage. Due to the low power losses the unit is very slender and only requires 46mm width on the DIN-rail. Large connection terminals allow for a safe and fast installation. The large international approval package makes this unit suitable for nearly every application.

(at 40°C; 20A output) 557000 hours
(at 40°C; 20A output) 134000 hours
(at 25°C; 40A output) 1576000 hours
(at 25°C; 40A output) 378000 hours

80mVpp (at 1x20A)
150mVpp (at 40A) (20Hz...20MHz; 50Ω)

13290000h (at 40°C; 20A input; MTBF SN 29500 IEC 61709)
6357000h (at 40°C; 40A input; MTBF SN 29500 IEC 61709)
22628000h (at 25°C; 20A input; MTBF SN 29500 IEC 61709)
12238000h (at 25°C; 40A input; MTBF SN 29500 IEC 61709)
381000h (at 40°C; 20A input; MTBF MIL HDBK 217F GB40)
278000h (at 40°C; 40A input; MTBF MIL HDBK 217F GB40)
518000h (at 25°C; 20A input; MTBF MIL HDBK 217F GB25)
366000h (at 25°C; 40A input; MTBF MIL HDBK 217F GB25)
1816000h (at 40°C; 20A input; MTBF MIL HDBK 217F GF40)
1401000h (at 40°C; 40A input; MTBF MIL HDBK 217F GF40)
2486000h (at 25°C; 20A input; MTBF MIL HDBK 217F GF25)
1861000h (at 25°C; 40A input; MTBF MIL HDBK 217F GF25)