PULS

Redundancy unit

DIMENSION series

Y-series

Dual-input redundancy module (2 x inputs + 1 x output)

diode technology
ATEX approval

9Vdc-60Vdc (12Vdc / 24Vdc / 48Vdc nom.)

20A (at 48Vdc)
0.5A/+60°C...+70°C (derating)

12-48Vdc (12Vdc / 24Vdc / 48Vdc nom.)

spring-clamp connections

short-circuit protection (25A threshold at 6V)
Series / parallel operation -- 1+1 Redundancy Use of 2 identical power supplies in parallel to provide continued operation following most failures in a single power supply. The 2 power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements. N+1 Redundancy Use of 3 or more identical power supplies in parallel to provide continued operation following most failures in a single power supply. All power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements.

DIN rail mounting

W32mm x H124mm x D102mm

32 mm

-40...+70 °C

150A peak max. inrush (at 9-60Vdc input)

Diode

(9-60Vdc input; 2x5A input) 7.8 W
(9-60Vdc input; 2x10A input) 17 W

Commercialized

YR2DIODE

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments

(at 40°C; 20A output; 2x5A/10A input) 25years / 219000 hours
(at 25°C; 10A output; 2x5A/10A input) 25years / 219000 hours

Cost effective solution to build redundant systems
Dual input with single output
2 diodes (common cathode)
DC 12-48V wide-range input
Full power between -40°C and +60°C
Width only 32mm
Rugged metal housing
Quick-connect spring-clamp terminals
Easy wiring;
Distribution terminal for negative pole included
3 Year warranty
The YR2.DIODE is a redundancy module which can be used to build 1+1 and N+1 redundant system. It is equipped with 2 input channels which can be connected to power supplies with up to 10A output current and 1 output which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behaviour as well as any kind of Hiccup overload behaviour. The YR2.DIODE is the perfect solution to use in a redundant system if the power supply itself is equipped with a DC-OK signal (e.g.; DIMENSION Q-Series). In addition to the YR2.DIODE is the YRM2.DIODE which has a monitoring circuitry included. LEDs and relay contacts signal when 1 of the 2 DC-input voltages is not in range due to a non-functioning power supply. Another interesting application for this redundancy module is to separate sensitive loads from non-sensitive loads. This avoids the distortion of the power quality for the sensitive loads which can cause controller failures. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.

800mVpp (20Hz...20MHz; 50Ω)

46500000h (at 40°C; 2x10A input; MTBF SN 29500 IEC 61709)
55700000h (at 40°C; 2x5A input; MTBF SN 29500 IEC 61709)
70000000h (at 25°C; 2x10A input; MTBF SN 29500 IEC 61709)
84000000h (at 25°C; 2x5A input; MTBF SN 29500 IEC 61709)
36200000h (at 40°C; 2x10A input; MTBF MIL HDBK 217F)
43500000h (at 40°C; 2x5A input; MTBF MIL HDBK 217F)
41100000h (at 25°C; 2x10A input; MTBF MIL HDBK 217F)
49300000h (at 25°C; 2x5A input; MTBF MIL HDBK 217F)