PULS

Power supply unit

DIMENSION series

Q-series

AC/DC Power supply unit (PSU) / converter
50% power reserve

50% power reserve
DC-OK rly. contact output

180Vac-264Vac (200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
164Vac turn-ON voltage
151Vac shutdown voltage

"DC-OK" LED

Single-phase (1AC)

20A (at 48Vdc)
17.8A (at 54Vdc)
24W/+60°C...+70°C (derating)

960W (at 48Vdc and 54Vdc)
1440W short-term (for 4s)

48Vdc-54Vdc (adjustable)
200mV turn-ON overshoot

30ms (buffer time at 230Vac input)

screw-clamp connections

output overvoltage protection (58.8Vdc typ. / 60Vdc max.)
Overload / short-circuit current -- min. 35A (max. 30A) load impedance <50mΩ
Series / parallel operation -- Power supplies can be paralleled to increase the output power. The output voltage of all power supplies shall be adjusted to the same value (+/-100mV) in Single use mode with the same load conditions on all units
Back-feeding loads max. 63V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.95 (230Vac input)

125 mm

DIN rail mounting

W125mm x H124mm x D127mm

Aluminium housing

-25...+70 °C

18A peak max. inrush

(230Vac input; full output load) 50.5 W
(120Vac input; full output load) 62.4 W

(230Vac input) 0.96

Commercialized

QS40484

(output stage) 3700 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

AC 200-240V Input
Width only 125mm Weight only 1.8kg
95% Full Load and Excellent Partial Load Efficiencies
50% BonusPower 1440W for up to 4s
55A High Peak Current for 25ms for Easy Fuse Tripping
Safe HiccupPLUS overload mode
Active PFC (Power Factor Correction)
Negligible low input inrush current surge
Full power between -25°C and +60°C
Current sharing feature for parallel use
Internal Data Logging for Troubleshooting Included.
DC-OK relay contact
Shut-down Input
3 Year warranty
The most outstanding features of the DIMENSION QSeries DIN-rail power supplies are the extremely high efficiencies and the small sizes which are achieved by a synchronous rectification and other technological designs. The QS40.484 is a device for 200-240V mains voltages. Large power reserves of 150% support the starting of heavy loads such as DC-motors or capacitive loads. In many cases this allows the use of a unit from a lower wattage class which saves space and money. High immunity to transients and power surges as well as low electromagnetic emission makes usage in nearly every environment possible. The integrated output power manager and input fuses as well as the near zero input inrush current make installation and usage simple. Diagnostics are easy due to the DC-OK relay a green DC-OK LED and the red overload LED. A large international approval package for a variety of applications makes this unit suitable for nearly every application

(at 25°C; 10A output; 1AC 230Vac input) 345000 hours
(at 40°C; 10A output; 1AC 230Vac input) 122000 hours
(at 25°C; 20A output; 1AC 230Vac input) 184000 hours
(at 40°C; 20A output; 1AC 230Vac input) 65000 hours

150mVpp (20Hz...20MHz; 50Ω)

392000h (at 40°C; 230Vac input; MTBF SN 29500 IEC 61709)
693000h (at 25°C; 230Vac input; MTBF SN 29500 IEC 61709)
158000h (at 40°C; 230Vac input; MTBF MIL HDBK 217F)
214000h (at 25°C; 230Vac input; MTBF MIL HDBK 217F)

750ms start-up delay (200-240Vac input)
18ms rise time (nominal input; constant full current load; 0mF load capacitance)
35ms rise time (nominal input; constant full current load; 20mF load capacitance)