PULS

Power supply unit

DIMENSION series

CP-series

AC/DC Power supply unit (PSU) / converter
20% power reserve

built-in decoupl. MOSFET (for 1+1 or N+1 redundancy)
20% power reserve
DC-OK rly. contact output

85Vac-264Vac (100Vac / 110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac nom.; 47-63Hz)
264-300Vac input overvoltage (for 500ms max.)
80Vac turn-ON voltage
70Vac shutdown voltage (steady-state)
55Vac shutdown voltage (250ms max.)

88Vdc-180Vdc (100Vdc / 110Vdc / 120Vdc / 127Vdc nom.)

"DC-OK" LED

Single-phase (1AC) or DC

12A (at 48Vdc; -25...+45°C)
10A (at 48Vdc; +45...+60°C)
7.5A (at 48Vdc; +70°C)

288W (-25...+45°C)
240W (-25...+60°C)
180W at +70°C (derates linearly between +60°C and +70°C)

24Vdc-25.4Vdc (adjustable)
200mV turn-ON overshoot

37ms (buffer time at 120/230Vac input)

hot-swappable connectors

output overvoltage protection (30.5Vdc typ. / 32Vdc max.)
Overload / short-circuit current -- 5A max. (R.M.S.) current / (typ. 14A) intermitted current peak for typ. 2s at load impedance 10mΩ
Series / parallel operation -- devices of the same type can be connected in series for higher output voltages / Power supplies can be paralleled for redundancy to gain higher system availability. The unit is already equipped with a MOSFET as decoupling device on the output to avoid that a faulty unit becomes a load for the other power supplies and the output voltage cannot be maintained any more.
Back-feeding loads max. 35V -- The unit is resistant and does not show malfunctioning when a load feeds back voltage to the power supply. It does not matter whether the power supply is ON or OFF. The absorbing energy can be calculated according to the built-in large sized output capacitor.

0.947 (230Vac input)
0.93 (120Vac input)

39 mm

DIN rail mounting

IP20

W39mm x H124mm x D117mm

Aluminium housing

-25...+70 °C

1.14A (230Vac input; full output)
2.17A (120Vac input; full output)
2.63A (100Vac input; full output)
2.35A (110Vdc input; 24Vdc / 10A output)
11A peak max. inrush (at 230Vac input)
7A peak max. inrush (at 120Vac input)

(230Vac input; full output load) 13.4 W
(120Vac input; full output load) 18.1 W

(230Vac input) 0.97
(120Vac input) 0.99

Commercialized

CP10241R2

(output stage) 4400 μF

CE marking
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments
EN 61000-6-4 Emission for industrial environments
EN 55011 / EN 55022 class B Disturbance characteristics

AC 100-240V Wide-range input
Width only 39mm
Built-in decoupling MOSFET for 1+1 and n+1 redundancy
Efficiency up to 94.7%
20% Output power reserve
Safe HiccupPLUS overload mode
Easy fuse breaking - 3 times nominal current for 12ms
Active power factor correction (PFC)
Minimal inrush current surge
Full power between -25°C and +60°C
DC-OK relay contact
Current sharing feature included
3 Year warranty
The Dimension CP-Series are cost optimized power supplies without compromising quality / reliability / performance.
The most outstanding features of the CP10.241-R1/ R2 units are the high efficiency; electronic inrush current limitation; active PFC; wide operational temperature range and the extraordinary small size.
The units include a decoupling MOSFET for building 1+1 or N+1 redundant power supply systems.
These redundancy power supplies come with 2 connection terminal options; spring-clamp terminals or plug connector terminals which allows replacement on an active application.
With high immunity to transients and power surges; low electromagnetic emission; a DC-OK signal contact for remote monitoring and a large international approval package; makes this unit suitable for nearly every application.
High immunity to transients and power surges as well as low electromagnetic emission; a DC-OK relay contact and a large international approval package make this unit suitable for nearly every situation.

(at 40°C; 5A output; 1AC 120Vac input) 153000 hours
(at 25°C; 5A output; 1AC 120Vac input) 434000 hours
(at 40°C; 10A output; 1AC 120Vac input) 78000 hours
(at 25°C; 10A output; 1AC 120Vac input) 220000 hours
(at 40°C; 12A output; 1AC 120Vac input) 47000 hours
(at 25°C; 12A output; 1AC 120Vac input) 132000 hours
(at 40°C; 5A output; 1AC 230Vac input) 188000 hours
(at 25°C; 5A output; 1AC 230Vac input) 531000 hours
(at 40°C; 10A output; 1AC 230Vac input) 109000 hours
(at 25°C; 10A output; 1AC 230Vac input) 307000 hours
(at 40°C; 12A output; 1AC 230Vac input) 71000 hours
(at 25°C; 12A output; 1AC 230Vac input) 200000 hours

50mVpp (20Hz...20MHz; 50Ω)

556000h (at +40°C; full output; 1AC 120Vac input; MTBF SN 29500 IEC 61709)
208000h (at 40°C; full output; 1AC 120Vac input; MTBF MIL HDBK 217F Ground Benign GB40)
46000h (at 40°C; full output; 1AC 120Vac input; MTBF MIL HDBK 217F Ground Fixed GF40)
1006000h (at +25°C; full output; 1AC 120Vac input; MTBF SN 29500 IEC 61709)
283000h (at +25°C; full output; 1AC 120Vac input; MTBF MIL HDBK 217F Ground Benign GB25)
59000h (at 25°C; full output; 1AC 120Vac input; MTBF MIL HDBK 217F Ground Fixed GF25)
1138000h (at +40°C; full output; 1AC 230Vac input; MTBF SN 29500 IEC 61709)
318000h (at 40°C; full output; 1AC 230Vac input; MTBF MIL HDBK 217F Ground Benign GB40)
63000h (at 40°C; full output; 1AC 230Vac input; MTBF MIL HDBK 217F Ground Fixed GF40)
641000h (at +25°C; full output; 1AC 230Vac input; MTBF SN 29500 IEC 61709)
232000h (at 25°C; full output; 1AC 230Vac input; MTBF MIL HDBK 217F Ground Benign GB25)
53000h (at 25°C; full output; 1AC 230Vac input; MTBF MIL HDBK 217F Ground Fixed GF25)

240-300ms start-up delay (100-230Vac input)
30ms rise time (nominal input; full constant current load; 0mF load capacitance)
75ms rise time (nominal input; full constant current load; 2mF load capacitance)